HPE7-A01 EXAM ONLINE & HPE7-A01 NEW TEST CAMP

HPE7-A01 Exam Online & HPE7-A01 New Test Camp

HPE7-A01 Exam Online & HPE7-A01 New Test Camp

Blog Article

Tags: HPE7-A01 Exam Online, HPE7-A01 New Test Camp, HPE7-A01 Detailed Study Dumps, Test HPE7-A01 Dumps Free, Best HPE7-A01 Practice

In this hustling society, our HPE7-A01 study guide is highly beneficial existence which can not only help you master effective knowledge but pass the HPE7-A01 exam effectively. They have a prominent role to improve your soft-power of personal capacity and boost your confidence of conquering the exam with efficiency. As there are all keypoints in the HPE7-A01 Practice Engine, it is easy to master and it also helps avoid a waste of time for selecting main content.

HPE7-A01 certification exam is suitable for IT professionals with a minimum of two years of experience in designing, deploying, and managing wireless networks. It is an advanced-level certification that requires candidates to have a deep understanding of Aruba wireless solutions, including Aruba Mobility Controllers, Aruba Access Points, and Aruba AirWave.

>> HPE7-A01 Exam Online <<

HPE7-A01 New Test Camp - HPE7-A01 Detailed Study Dumps

Our TestKingFree offers you the high-quality HPE7-A01 exam dumps and answers, and make you be closer to success. If you are still worried, you can download HPE7-A01 exam dumps' free demo and answers on probation on TestKingFree.COM. We promise, when you purchase HPE7-A01 Exam Dumps and answers, we will also provide one year free renewal service for you.

HP Aruba Certified Campus Access Professional Exam Sample Questions (Q51-Q56):

NEW QUESTION # 51
With Aruba CX 6300. how do you configure ip address 10 10 10 1 for the interface in default state for interface 1/1/1?

  • A. int 1/1/1. switching, ip address 10 10 10 1/24
  • B. int 1/1/1. no switching, ip address 10 10 10.1/24
  • C. int 1/1/1. routing, ip address 10.10.10 1/24
  • D. int 1/1/1. ip address 10.10.10.1/24

Answer: B

Explanation:
Explanation
To configure an IP address for an interface in default state for interface 1/1/1 on Aruba CX 6300 switch, you need to disable switching on the interface first with the command no switching. Then you can assign an IP address with the command ip address. The other options are incorrect because they either do not disable switching or use invalid keywords such as switching or routing. References:
https://www.arubanetworks.com/techdocs/AOS-CX_10_08/UG/bk01-ch01.html
https://www.arubanetworks.com/techdocs/AOS-CX_10_08/UG/bk01-ch02.html


NEW QUESTION # 52
The administrator notices that wired guest users that have exceeded their bandwidth limit are not being disconnected Access Tracker in ClearPass indicates a disconnect CoA message is being sent to the AOS-CX switch.
An administrator has performed the following configuration

What is the most likely cause of this issue?

  • A. There is a time difference between the switch and the ClearPass Policy Manager
  • B. The SSL certificate for CPPM has not been added as a trust point on the switch
  • C. Change of Authorization has not been globally enabled on the switch
  • D. There is a mismatch between the RADIUS secret on the switch and CPPM.

Answer: A

Explanation:
Change of Authorization (CoA) is a feature that allows ClearPass Policy Manager (CPPM) to send messages to network devices such as switches to change the authorization state of a user session. CoA requires that both CPPM and the network device support this feature and have it enabled. For AOS-CX switches, CoA must be globally enabled using the command radius-server coa enable. If CoA is not enabled on the switch, the disconnect CoA message from CPPM will be ignored and the user session will not be terminated. References:
https://www.arubanetworks.com/techdocs/ClearPass/6.7/PolicyManager/index.htm#CPPM_UserGuide/Admin/C


NEW QUESTION # 53
You need to ensure that voice traffic sent through an ArubaOS-CX switch arrives with minimal latency.
What is the best scheduling technology to use for this task?

  • A. Strict queuing
  • B. DWRR queuing
  • C. Rate limiting
  • D. QoS shaping

Answer: A

Explanation:
Strict queuing is the best scheduling technology to use for voice traffic on an AOS-CX switch.
Scheduling is a mechanism that determines how packets are transmitted from different queues on an egress port. Strict queuing is a scheduling method that gives the highest priority queue absolute preference over all other queues, regardless of their size or utilization. Voice traffic should be assigned to the highest priority queue and scheduled with strict queuing to ensure minimal latency and jitter. The other options are incorrect because they are either not scheduling methods or not optimal for voice traffic.
References:
https://www.arubanetworks.com/techdocs/AOS-CX/10.04/HTML/5200-6728/bk01-ch02.html
https://www.arubanetworks.com/techdocs/AOS-CX/10.04/HTML/5200-6728/bk01-ch03.html


NEW QUESTION # 54
A network engineer recently identified that a wired device connected to a CX Switch is misbehaving on the network To address this issue, a new ClearPass policy has been put in place to prevent this device from connecting to the network again.
Which steps need to be implemented to allow ClearPass to perform a CoA and change the access for this wired device? (Select two.)

  • A. Configure dynamic authorization on the switchport
  • B. Use Dynamic Segmentation.
  • C. Configure dynamic authorization on the switch.
  • D. Bounce the switchport
  • E. Confirm that NTP is configured on the switch and ClearPass

Answer: C,E

Explanation:
To allow ClearPass to perform a CoA and change the access for a wired device, the following steps need to be implemented:
* Confirm that NTP is configured on the switch and ClearPass. NTP is required to synchronize the time between the switch and ClearPass, which is essential for CoA messages to be processed correctly.
* Configure dynamic authorization on the switch. Dynamic authorization is a feature that enables the switch to accept CoA messages from a RADIUS server and apply them to existing sessions.
Dynamic authorization can be enabled globally or per port on the switch.
* Optionally, configure dynamic authorization on the switchport. This step is not required, but it can provide more granular control over which ports can accept CoA messages from a RADIUS server. Bouncing the switchport or using Dynamic Segmentation are not necessary steps for allowing ClearPass to perform a CoA and change the access for a wired device.


NEW QUESTION # 55
What are the requirements to ensure that WMM is working effectively'? (Select two)

  • A. The Aruba AOS10 APs installed have to be converted to controlled mode
  • B. All APs need to be from the AP-5xx series and AP-6xx series which are Wi-Fi CERTIFIED 6.
  • C. The APs and the controller are Wi-Fi CERTIFIED for WMM which is enabled
  • D. The Client must be Wi-Fi CERTIFIED for WMM and configured for WMM marking.
  • E. The AP needs to be connected via a tagged VLAN to the wired port

Answer: C,D

Explanation:
These are the correct requirements to ensure that WMM (Wi-Fi Multimedia) is working effectively. WMM is a standard that provides quality of service (QoS) for wireless networks by prioritizing traffic into four categories: voice, video, best effort, and background. To use WMM, both the APs and the controller must be Wi-Fi CERTIFIED for WMM, which means they have passed interoperability tests and comply with the standard. WMM must also be enabled on the APs and the controller, which is usually the default setting.
The client device must also be Wi-Fi CERTIFIED for WMM and configured for WMM marking, which means it can tag its traffic with the appropriate priority level based on the application type. The other options are incorrect because they are either not related to WMM or not required for WMM to work.
References:
https://www.arubanetworks.com/techdocs/ArubaOS_86_Web_Help/Content/arubaos-solutions/wlan- qos/wmm.h
https://www.wi-fi.org/discover-wi-fi/wi-fi-certified-wmm


NEW QUESTION # 56
......

We know students run on low budgets so we made every possible effort to reduce the pre-purchase doubts. You can easily avail of our product at an affordable price. We are aware that the syllabus of HPE7-A01 exam is extremely dynamic and changes with incoming updates, so we also offer you updates for free after purchase for 1 year. We assure you in every possible way that our HP HPE7-A01 Exam Preparation material is the most reliable there is.

HPE7-A01 New Test Camp: https://www.testkingfree.com/HP/HPE7-A01-practice-exam-dumps.html

Report this page